Skip to content

Our work

The kind of work we do

Harness repairs, module replacements and brake jobs are the bread and butter at 230 Colborne St. The pairs below are illustrative examples of those repairs, not photos from the shop. Pictures of Tony Berardocco's own jobs will replace them as they come through the bay.

Call (905) 735-3515Book online

Compare

Before and after

Drag each handle, or focus it and use the arrow keys, to compare. Each one is an illustrative example of the repairs the shop specializes in.

  • Illustrative example: A corroded battery terminal beside a clean connector being seated into a factory harness, after
    Illustrative example: A corroded battery terminal beside a clean connector being seated into a factory harness, before
    Electrical repair: corroded terminals and bad connections cleaned up and reconnected properly. Drag or use the arrow keys to compare before and after.
  • Illustrative example: Corroded control module beside a new programmed unit, after
    Illustrative example: Corroded control module beside a new programmed unit, before
    Module work: failed unit replaced, programmed and coded in-house. Drag or use the arrow keys to compare before and after.
  • Illustrative example: Corroded brake rotor beside a newly installed rotor, after
    Illustrative example: Corroded brake rotor beside a newly installed rotor, before
    Brake service: seized, corroded hardware back to new. Drag or use the arrow keys to compare before and after.

Have a job like one of these? Call the shop at (905) 735-3515.

The shop floor

Around the bay

Scenes from the kind of work an independent shop does every day. These are stock and studio images, not photos of 230 Colborne St. Pictures of the shop itself will replace them.

  • Empty repair bay at night with a pickup raised on a two-post lift under amber work lights
    A quiet bay after hours
  • Mechanic's hands turning a ratchet on an exposed engine valvetrain
    Ratchet work on an engine valvetrain
  • Disc brake caliper and rotor with the wheel removed, in low light
    Brakes inspected with the wheel off
  • Diagnostic scan tool plugged into an OBD port under the dash, screen showing live data graphs
    Scan tool reading live data
  • Open-end wrenches laid out on a black surface
    Open-end wrenches laid out on the bench
  • Gloved hand fitting a brake rotor onto a wheel hub
    Fresh rotor going on
  • Gloved hands probing a wiring connector with a multimeter in a dark engine bay
    Checking a connector with the meter
  • Underside of an SUV raised on a two-post lift in a service bay
    Up on the hoist for a proper look
  • Mechanic tightening an intake hose clamp with a screwdriver under the hood
    Tightening a hose clamp under the hood
  • Combination wrenches in a tool tray with a car's lights glowing in the background
    Wrenches in a tool tray
  • New brake rotor and red caliper on a lifted vehicle in a dark workshop
    Fresh rotor and caliper fitted
  • Mechanic's hand working on a transmission from underneath a raised vehicle
    Driveline work from below
  • Engine bay with a strut brace and intake plumbing in dim light
    Under the hood

Not sure what your vehicle needs? Call the shop at (905) 735-3515.

Book your vehicle in

(905) 735-3515

Give the shop a call. Open Monday to Friday, 8:30am to 5:30pm.

Call (905) 735-3515Contact and directions
Call (905) 735-3515